B. Release

C. Microphone

D. Power LED

E. Power Socket

F. Phone Connector Socket

G. Phone Connector

H. Volume Adjuster

I. Fastening Arm

J. Microphone Level

L. Fix Button

M. Cigarette Plug

N. Flex Neck

O. Power Plug

P. Mounting Plate

1.  Setting Phone to Holder, then snap Fastening Arm (I) to fix phone.

2.  Press Release Button (B) will release Fastening Arm (I)

Cigarette Bracket

A.  For the vehicle that the cigareet lighter on the plane of shift.

1.  Slide the Cigarette Bracket onto the holder byu arrow direction (Fig 2-1)

2.  The Flex Neck (N) can be bent in all direction to allow the plug to fit in most cars.

1.   Slide the Cigarette Bracket onto the holder by arrow directions (Fig 3-1)

2.  The Flex Neck (N) can be bent in all directions to allow the plug to fit in most cars.

1. Select a position for Mini Mount then clean the surface with rubbing alcohol. ( any dirt or oil left on surface will effect the strength of bonding)

2. Remove the film of the rape on the Mini Mount and carefully place in position.

3.Allow the tape to cure for apr.70hours before putting to much pressure.

4.Insert the Mounting Plate onto the Mini Mount to fit the Cigarette Bracket .

5Press tabs on both sides of Mounting Plate then take the Cigarette Bracket away.

*Handsfree Function

1. Pre-Use: It is necessary to release the original locked handsfree program of your cellular phone before using this product. Please contact the local agent of your cellular phone for detail information.

2. Connect Phone Connector with your phone and adjust phone volume to Max. volume.

3. Start Engine first, then connect the Power Plug (o) into power socket (E), the power LED light will on.

4. To make a call press dial as normal on the phone’s key pad. Note: It is normal for some phones that there is no dialing tone coming from hands free speaker.

5. To receive a call press SEND or whichever button normally answer a call.

6. Then simply speak into the microphone and your voice will be on to your caller. Your callers voice will broadcast on the speaker.

7. Note: (1) If the voice of the other end is smaller, please adjust the microphone level (J) to H

(2) If intermittent voice comes from the other end, please adjust the Microphone Level J to L.

(3) If intermittent voice comes from the speaker, please adjust the volume adjuster (H) to more high.

8. Speaker volume can be adjusted by volume adjuster.

9. For private purpose microphone-mic piece (optional) can be used by plug into Earphone Socket (K)